TEST SPRAY USING SPRAYING GUN PROVIDED. ASJUST PRESSURE FOR DESIRED TEXUTRE. - 4 BOTTLES COLOR TONER (4OZ EACH). - 4 QUARTS TINTABLE BED LINER. 6 - WAIT 20 MINUTES. REMOVE MASKING TAPE (PICTURE 6).
Color Match Touch Up Spray Can Paint For 2006 - 2011 Kia Rio Brush Touch Up Spray Can Paint Please order based on color code only. Color names change between models or years of manufacturing. What is the difference between 1K and 2K Clear Coat? 2K (Urethane) clear coat is similar to factory clear. It has hardener (mixed by pressing on the mixing valve at the bottom of the can). Hardener increases gloss and resistance to UV, scratching and chipping. After hardener is mixed with clear coat, it must be sprayed within 6 hours. 1K (Acrylic) clear coat is a single component clear. It has no time restrictions, but has less gloss and less resistance to UV, scratching and chipping. If using around a gas tank, acrylic clear coat is not recommended. Recommendations: 1. Always test spray base coat before application. If color does not match, contact us via Ebay messaging system. 2. Primer, Base Coat and Clear Coat flow will change depending on the temperature. Lower temperatures will reduce drying speed, which may cause "runs". Before applying to the vehicle, test spray using spraying card (included in every order) to determine drying speed. Warranty We warranty all products for 60 days. If there is an issue with color or any other component in the kit, contact us via Ebay messaging.
Genuine OEM Automotive Touch Up Spray Paint. Our Spray Touch Up Paint is great for larger repairs or painting a new panel. Get the Rest or Grab the Best! Unbeatable Quality and Durability - Easy to Apply.
(1 quart READY TO SPRAY BASE COAT + STRAINER + TACK CLOTH).
Kia Paint Codes: IY. Matches Kia Spicy Red. OEM COLOR MATCH SPRAY PAINT. High Gloss Protective Finish. Acrylic Urethane Automotive Exterior Paint. Great For Cost Effective DIY Repairs. These are photos taken by us of our product.
Genuine OEM Automotive Touch Up Paint. ERA Paints was founded in 2016 to bring the finest quality auto touch up paint products to the DIY Automotive Market. Our Spray Touch Up Paint is great for larger repairs or painting a new panel.
Mix hardener with paint, shake paint bottle for 15 seconds. Use the brush to fill scratch/chip (Picture - 5). If applying more than one coat, wait for 15 min between the coats. Once hardener is added, paint must be used within 6 hours.
Single Stage Touch Up Kit With Hardener For 2010 - 2019 Kia Forte Single Stage Touch Up Instructions When your order arrives, shake paint bottle for 15 seconds, open and compare color on the bottom of the cap to the vehicle color. If color is different, contact us via Ebay messaging. Clean the area with soap and water (Picture - 1). Use sanding pad and 600 sand paper to remove sharp edges from the scratch/chip. If metal is exposed, remove all rust spots (if metal is exposed, primer is recommended but not required), (Picture - 2,3). Clean scratch/chip with Wax & Grease remover (Picture - 4).Mix hardener with paint, shake paint bottle for 15 seconds. Use the brush to fill scratch/chip (Picture - 5). If applying more than one coat, wait for 15 min between the coats. Once hardener is added, paint must be used within 6 hours. Wait 24 - 48 hours for paint to cure completely (vehicle can be driven). Use sanding block with 1500 sand paper to remove excess paint (Picture - 6). Use sanding block with 2000 sand paper to level new and existing paint (Picture - 7). Use polishing paste to remove fine scratches and blend the color using circular motion (Picture - 8)--------------------------------------------------------------------------------------- Why use touch up with Hardener? Factory paint has hardener to increase gloss and resistance to UV damage, scratching and chipping. Touch up paint with hardener will better match color, gloss and durability of factory paint. What is included in the touch up kit? - 1/2oz Wax & Grease Remover- 1/2oz or 1oz Base Coat- Hardener- Sand Paper (2- 600, 2- 1500, 2- 2000) - Sanding Block- 1/2oz Sanding Paste- 2 Detail Brushes- Wiping/Polishing Towel Warranty We warranty all products for 60 days. If there is an issue with color or any other component in the kit, contact us via Ebay messaging.
Mix hardener with paint, shake paint bottle for 15 seconds. Use the brush to fill scratch/chip (Picture - 5). If applying more than one coat, wait for 15 min between the coats. Once hardener is added, paint must be used within 6 hours.
Apply paint with the brush. Paint can be applied slightly above existing factory paint level or reapplied when first layer is dry (Picture 3). Clear coat application is not required. Apply base coat paint with the brush at level or slightly below factory paint level.
